Chelford 52 Sand for Resin Bound Gravel

Chelford 52 Kiln Dried Sand for Resin Bound Gravel

  • Fine grade sand
  • Kiln-dried, low moisture content
  • Supplied in 6.25kg bags
  • Used for improved adhesion and anti-slip


Most commonly used in resin bound gravel mixes, this finely graded (0.2-0.36mm) sand has been kiln-dried to ensure the lowest moisture content possible to reduce the risk of reaction to polyurethane resin binders. Either added to the mix in a forced action mixer or sprinkled over the upper surface when it’s tacky, Chelford 52 sand can help to further improve the strength of resin bound gravel surfacing or add texture to provide an anti-slip surface. This can be most useful when laying a resin bound gravel driveway which is on an incline to prevent tyres from slipping on the surface.

Typical applications require one 6.25kg bag to be used per 100kg resin mix and will add anti-slip to approximately 3.3m² when the resin bound gravel mix is laid at 18mm.

Additional information

Weight 6.25 kg