Mixers built for long-life
SoRoTo forced action mixers are built to be long lasting and to withstand a rough and tough life on construction sites and being transported around almost daily.
The mixers do not break often, but when they do extensive spare parts are available in stock in the UK.
Unlike most other manufacturers, SoRoTo pan mixers are covered by a two year warranty – twice the industry average – for extra peace of mind.
What spare parts are available? This blog post explains.
Forced action mixer spare parts
Forced action mixer spare parts can fix your mixer when needed.
Many applications that use the mixers are time-critical so it is important that you can get back on your feet as soon as possible.
Each upright mixer has a wide range of spares available.
This blog post explains.
What are rubber paddles?
Rubber paddles are recommended when you are mixing material that includes any aggregate over 8mm in diameter.
With rubber blades, your mixing arms and the gear motor is spared from any unnecessary overload and helps to prevent damage to the mixer pan. Rubber is recommended when mixing materials containing aggregate up to 32mm in diameter.
It is easy to replace the standard mixing arms with SoRoTo rubber paddles – just lift the old ones out and put the replacement in their place.
What is a dust controller?
A dust controller will minimise the dust in the air without compromising the view of the material.
It is easy to operate. It fits onto the forced action mixer on the inside of the grid lid and is connected to an industrial vacuum to help remove and contain the excess dust.
They are needed up to the point where water is added to the mixture. Though it can remain attached to the grid lid – with or without the dust controller being used.
SoRoTo 40L Spare Parts
2: Grid lid (hinge 100mm). Spare Part No: 040.002
3: Mixer drum (including mixer gate, complete set). Spare Part No: 040.003
3R: Rubber strap for grid lid. Spare Part No: 040.003R
4: Frame, complete with wheels etc. Spare Part No: 040.004
5: Loading wheel (1 pc., 80mm, excluding bolt). Spare Part No: 040.005
5B: Bolt (1 pc for 80mm loading wheel). Spare Part No: 040.005B
6: Wheel (1 pc, 300mm, excluding bolt). Spare Part No: 040.006
6B: Bolt (1 pc.) for 300mm wheel. Spare Part No: 040.006B
6W: Washer (1 pc.) for 300mm wheel. Spare Part No: 040.006W
7: Mixer gate (including bolt etc). Spare Part No: 040.007
8: Switch 11 Amp with thermal circuit breaker. Spare Part No: 040.008-110V
8E: Safety switch – by the grid lid. Spare Part No: 040.008E
8K: Cassette for safety switch, complete. Spare Part No: 040.008K
8K1: Piece for safety switch (blended metal part). Spare Part No: 040.008K1
8K2: Piece for safety switch (twisted metal part). Spare Part No: 040.008K2
8K3: Piece for safety switch (rubber part). Spare Part No: 040.008K3
9: Mixer arm (1 pc.), Side (long). Spart Part No: 040.009
9A: Mixer arm (1 pc.) side (short). Spare Part No: 040.009A
10: Mixer arm (1 pc.), side-base. Spare Part No: 040.010
11: Mixer arm (1 pc.), rake. Spare Part No: 040.011
12: Drive shaft (complete). Spare Part No: 040.012
12A: Spring pins (complete set of 12 including a jig). Spare Part No: 040.012A
13: Gear motor (0.75kW, 1400/30 RPM, 110V). Spare Part No: 040.013-110V
13G: Gear only. Spare Part No: 040.013G
13M: Motor only. Spare Part No: 040.013M-110V
14: Starting capacitor (125 uF). Spare Part No: 040.014
15: Operating capacitor (25 uF). Spare Part No: 040.015
16: Phase capacitor (20 uF). Spare Part No: 0040.016
17B: Telescopic legs (rear). Spare Part No: 040.017B
17L: Telescopic leg (1 pc.), front – left side. Spare Part No: 040.017L
17R: Telescopic leg (1 pc.), front – right side. Spare Part No: 040.017R
17SB: Bolt and nut (1 pair) for telescopic leg (1 pc.). Spare Part No: 040.017SB
19: Safety grid by the mixer gate. Spare Part No: 040.019
22: Mixer arms, (4 pcs, complete set). Spare Part No: 040.022
22A: Mixer arms, (4 pcs, without cross joint). Spare Part No: 040.022A
30: Discharge chute (including nuts). Spare Part No: 040.030
44: Cross joint for mixer arms, steel. Spare Part No: 040.044
SoRoTo 80L Spare Parts
1: Dust eliminator. Spare Part No: 080.001DL
2: Grid lid (hinge 100mm). Spare Part No: 080.002
3: Mixer drum (including mixer gate, complete set). Spare Part No: 080.003
3R: Rubber strap – for grid lid. Spare Part No: 080.003R
4: Frame (complete with wheels etc). Spare Part No: 080.004
4B: Bucket stand. Spare Part No: 080.004B
4F: Frame, (front part, u-shape). Spare Part No: 080.004F
4L: Frame (left side part). Spare Part No: 080.004L
4R: Frame (right side part). Spare Part No: 080.004R
4T: Frame (top/rear part). Spare Part No: 080.004T
5: Loading wheel (1 pc, 80mm, excluding bolt). Spare Part No: 080.005
5B: Bolt (1 pc, for 80mm loading wheel). Spare Part No: 080.005B
6: Wheel (1 pc, 300mm, excluding bolt). Spare Part No: 080.006
6B: Bolt (1 pc. for 300mm wheel). Spare Part No: 080.006B
6W: Washer (1 pc. for 300mm wheel). Spare Part No: 080.007W
7: Mixer gate (including bolt etc). Spare Part No: 080.007
8: Switch 16 Amp (with thermal circuit breaker). Spare Part No: 080.008-110V
8E: Safety switch – by the grid lid. Spare Part No: 080.008E
8K: Cassette for safety switch (complete). Spare Part No: 080.008K
8K1: Piece for safety switch (bended metal part). Spare Part No: 080.008K1
8K2: Piece for safety switch (twisted metal part). Spare Part No: 080.008K2
8K3: Piece for safety switch (rubber part). Spare Part No: 080.008K3
9: Mixer arm (1 pc, side). Spare Part No: 080.009
10: Mixer arm (1 pc, side-base). Spare Part No: 080.010
11: Mixer arm (1 pc, rake). Spare Part No: 080.011
12: Drive shaft (complete). Spare Part No: 080.012
12A: Spring pins (complete set of 12 pins including a jig). Spare Part No: 080.012A
13: Gear motor (1.1kW, 1400/30 RPM, 110V). Spare Part No: 080.013-110V
13G: Gear only. Spare Part No: 080.013G
13M: Motor only. Spare Part No: 080.013M-110V
14: Starting capacitor (600 uF). Spare Part No: 080.014_600
15: Operating capacitor (100 uF). Spare Part No: 080.015_100
16: Phase capacitor (80 uF). Spare Part No: 080.016_080
17B: Telescopic legs (rear). Spare Part No: 080.017B
17L: Telescopic leg (front-left side). Spare Part No: 080.017L
17R: Telescopic leg (front-right side). Spare Part No: 080.017R
17SB: Bolt and nut (1 pair) for telescopic leg (1 pc). Spare Part No: 080.017SB
19: Safety grid – by the mixer gate. Spare Part No: 080.019
20: Mixer arms with rubber (3 pcs, complete set). Spare Part No: 080.020
20A: Mixer arms with rubber (3 pcs, without cross joint). Spare Part No: 080.020A
21: Rubber parts (replacement set, complete). Spart Part No: 080.021
21A: Rubber parts (replacement set, blades only). Spare Part No: 080.021A
21B: Rubber parts (replacement set, cross joint only). Spare Part No: 080.021B
22: Mixer arms (set of 4 pcs, complete). Spare Part No: 080.022
22A: Mixer arms (set of 4 pcs, without cross joint). Spare Part No: 080.022A
23: Bracket for mixer blade (rubber, side). Spare Part No: 080.053
30: Discharge cute (including nuts). Spare Part No: 080.030
44: Cross joint for mixer arms (steel). Spare Part No: 080.044
47: Cross joint for mixer arms (rubber). Spare Part No: 080.047
48: Mixer arm with rubber, rake. Spare Part No: 080.048
49: Mixer arm with rubber, side-base. Spare Part No: 080.049
50: Mixer arm with rubber, side. Spare Part No: 080.050
51: Bracket for mixer blade (rubber, rake). Spare Part No: 080.051
52: Bracket for mixer blade (rubber, side-base). Spare Part No: 080.052
SoRoTo 100L Spare Parts
1: Dust eliminator. Spare Part No: 100.001DL
2: Grid lid (hinge 100mm). Spare Part No: 100.002
3: Mixer drum (including mixer gate, complete set). Spare Part No: 100.003
3R: Rubber strap – for grid lid. Spare Part No: 100.003R
4: Frame (complete with wheels etc). Spare Part No: 100.004
4B: Bucket stand. Spare Part No: 100.004B
4F: Frame (front part, u-shape). Spare Part No: 100.004B
4L: Frame (left side part). Spare Part No: 100.004L
4R: Frame (right side part). Spare Part No: 100.004R
4T: Frame (top/rear part). Spare Part No: 100.004T
5: Loading wheel (1pc, 80mm excluding bolt). Spare Part No: 100.005
5B: Bolt (1pc) for 80mm loading wheel. Spare Part No: 100.005B
6: Wheel (1pc, 300mm excluding bolt). Spare Part No: 100.006
6B: Bolt (1pc) for 300mm wheel. Spare Part No: 100.006B
6W: Washer (1pc) for 300mm wheel. Spare Part No: 100.006W
7: Mixer gate (including bolt etc). Spare Part No: 100.007
8: Switch 16amp with thermal circuit breaker. Spare Part No: 100.008-110v
8E: Safety switch – by the grid lid. Spare Part No: 100.008E
8K: Cassette for safety switch (complete). Spare Part No: 100.008K
BK1: Piece for safety switch (bended metal part). Spare Part No: 100.008K1
BK2: Piece for safety switch (twisted metal part). Spare Part No: 100.008K2
BK3: Piece for safety switch (rubber part). Spare Part No: 100.008K3
9: Mixer arm (1pc, side). Spare Part No: 100.009
10: Mixer arm (1pc, side base). Spare Parts No: 100.010
11: Mixer arm (1pc, rake). Spare Part No: 100.011
12: Drive shaft (complete). Spare Part No: 100.012
12A: Spring pins (complete set of 12 including jig). Spare Part No: 100.012A
13: Gear motor (1.1kW, 140/30RPM, 110v). Spare Part No: 100.013-110V
13G: Gear only. Spare Part No: 100.013G
13M: Motor only. Spare Part No: 100.013M-110V
14: Starting capacitor 600u00b5f. Spare Part No: 100.014_600
15: Operating capacitor 100u00b5f. Spare Part No: 100.015_100
16: Phase capacitor 80u00b5f. Spare Part No: 100.016_80
17B: Telescopic legs (rear). Spare Part No: 100.017B
17L: Telescopic legs (front left). Spare Part No: 100.017L
17R: Telescopic legs (front right). Spare Part No: 100.017R
17SB: Bolt and nut (1 pair) for telescopic leg (1pc). Spare Part No: 100.017SB
19: Safety grid by mixer gate. Spare Part No: 100.019
20: Mixer arms with rubber (3pcs, complete set). Spare Part No: 100.020
20A: Mixer arm with rubber (3pcs, without cross joints. Spare Part No: 100.020A
21: Rubber parts (replacement set, complete). Spare Part No: 100.021
21A: Rubber parts (replacement set, blades only). Spare Part No: 100.021A
21B: Rubber parts (replacement set, cross joint only). Spare Part No: 100.021B
22: Mixers arms (set of 4pcs, complete). Spare Part No: 100.022
22A: Mixers arms (set of 4 pcs, without cross joint). Spare Part No: 100.022A
30: Discharge chute (includes nuts). Spare Part No: 100.030
44: Cross joint for mixer arms, steel. Spare Part No: 100.044
47: Cross joint for mixer arms, rubber. Spare Part No: 100.047
48: Mixer arm with rubber (rake). Spare Part No: 100.048
49: Mixer arm with rubber (side base). Spare Part No: 100.049
50: Mixer arm with rubber (side). Spare Part No: 100.050
51: Bracket for mixer blade, rubber, rake. Spare Part No: 100.051
52: Bracket for mixer blade, rubber, side base. Spare Part No: 100.052
53: Bracket for mixer blade, rubber, side. Spart Part No: 100.053
SoRoTo 120L Spare Parts
1: Dust eliminator. Spare Part No: 120.001DL
2: Grid lid (hinge 100mm). Spare Part No: 120.002
3: Mixer drum (including mixer gate, complete set). Spare Part No: 120.003
3R: Rubber strap – for grid lid. Spare Part No: 120.003R
4: Frame (complete with wheels etc). Spare Part No: 120.004
4B: Bucket stand. Spare Part No: 120.004B
4F: Frame (front part, u-shape). Spare Part No: 120.004F
4L: Frame (left side part). Spare Part No: 120.004L
4R: Frame (right side part). Spare Part No: 120.004R
4T: Frame (top/rear part). Spare Part No: 120.004T
5: Loading wheel (1pc, 80mm excluding bolt). Spare Part No: 120.005
5B: Bolt (1pc) for 80mm loading wheel. Spare Part No: 120.005A
6; Wheel (1pc, 300mm excluding bolt). Spare Part No: 120.006
6B: Bolt (1pc) for 300mm wheel. Spare Part No: 120.006B
6W: Washer (1pc) for 300mm wheel. Spare Part No: 120.006W
7: Mixer gate including bolt etc. Spare Part No: 120.007
8: Switch 20-25am with thermal circuit breaker and o-discharger. Spare Part No: 120.008-110v
8E: Safety switch – by the grid lid. Spare Part No: 120.008E
8K: Cassette for safety switch (complete). Spare Part No: 120.008K
8K1: Piece for safety switch (bended metal part). Spare Part No: 120.008K1
8K2: Piece for safety switch (twisted metal part). Spare Part No: 120.008K2
8K3: Piece for safety switch (rubber part). Spare Part No: 120.008K3
10: Mixer arm (1pcs, side-base). Spare Part No: 120.010
12: Drive shaft (complete). Spare Part No: 120.012
12A: Spring pins (complete set of 12 including jig). Spare Part No: 120.012A
13: Gear motor (1.8kW, 1400/30RPM, 110v). Spare Part No: 120.013-110V
13G: Gear only. Spare Part No: 120.013G
13M: Motor only. Spare Part No: 120.013M-110v
14: Starting capacitor 800u00b5f. Spare Part No: 120.014_800
15: Operating capacitor 120u00b5f. Spare Part No: 120.015_120
16: Phase capacitor 100u00b5f. Spare Part No: 120.016_100
17B: Telescopic legs (rear). Spare Part No: 120.017B
17L: Telescopic legs (front left). Spare Part No: 120.017L
17R: Telescopic legs (front right). Spare Part No: 120.017R
17SB: Bolt and nut (1 pair) for telescopic leg (1pc). Spare Part No: 120.017SB
19: Safety grid – by mixer gate. Spare Part No: 120.019
20: Mixer arms with rubber (3pcs, complete set). Spare Part No: 120.020
20A: Mixer arms with rubber (3pcs, without cross joint). Spare Part No: 120.020A
21: Rubber parts (replacement set, complete). Spare Part No: 120.021
21A: Rubber parts (replacement set, blades only). Spare Part No: 120.021A
21B: Rubber parts (replacement set, cross joint only). Spare Part No: 120.021B
23: Mixer arms (set of 4pcs, complete). Spare Part No: 120.023
24: Mixer arm (1pc, side). Spare Part No: 120.024
24A: Mixer blade (separate side). Spare Part No: 120.024A
25: Mixer arm (1pc, side-base). Spare Part No: 120.025
25A: Mixer blade (separate, side-base). Spare Part No: 120.025A
26: Mixer arm (1pc, rake). Spare Part No: 120.026
26A: Mixer blade (separate, rake). Spare Part No: 120.026A
27: Mixer blades (steel, complete set, 4pcs including nuts). Spare Part No: 120.027
30: Discharge chute including bolts. Spare Part No: 120.030
44: Cross joint for mixer arms (steel, including bolts). Spare Part No: 120.044
47: Cross joint for mixer arms (rubber, including brackets and bolts). Spare Part No: 120.047
48: Mixer arm (with rubber, rake). Spare Part No: 120.048
49: Mixer arm (with rubber, side-base). Spare Part No: 120.049
50: Mixer arm (with rubber, side-base). Spare Part No: 120.050
51: Bracket for mixer blade (rubber, rake). Spare Part No: 120.051
52: Bracket for mixer blade (rubber, side-base). Spare Part No: 120.052
53: Bracket for mixer blade (rubber, side). Spare Part No: 120.053
SoRoTo 200L Spare Parts
1: Dust eliminator. Spare Part No: 200.001DL
2: Grid lid (hinge 100mm). Spare Part No: 200.002
3: Mixer drum (including mixer gate, complete set). Spare Part No:200.003
3R: Rubber strap – for grid lid. Spare Part No: 200.003R
4: Frame (complete with wheels etc). Spare Part No: 200.004
4F: Frame (front part, u-shape). Spare Part No: 200.004F
4L: Frame (left side part). Spare Part No: 200.004L
4R: Frame (right side part). Spare Part No: 200.004R
4T: Frame (top/rear part). Spare Part No: 200.004T
5: Loading wheel (1pc, 80mm, excluding bolt). Spare Part No: 200.005
5B: Bolt (1pc) for 80mm loading wheel. Spare Part No: 200.005B
6: Wheel (1pc) 400mm excluding bolt. Spare Part No: 200.006
6A: Axle (1pc) for 400mm wheel. Spare Part No: 200.006A
7: Mixer gate including bolt etc. Spare Part No: 200.007
8: Switch 9.5 Amp with thermal circuit breaker and phase adjust. Spare Part No: 200.008
8E: Safety switch – by the grid lid. Spare Part No: 200.008E
8K: Cassette for safety switch (complete). Spare Part No: 200.008K
8K1: Piece for safety switch (bended metal part). Spare Part No: 200.008K1
8K2: Piece for safety switch (twisted metal part). Spare Part No: 200.008K2
8K3: Piece for safety switch (rubber part). Spare Part No: 200.008K3
9: Outlet plug (1x230v, 16amp). Spare Part No: 200.009
10: Top disc (separate, without u-bolts). Spare Part No: 200.010
11: U-bolt (1pcs) for securing the top disc (8pcs in total, including nut). Spare Part No: 200.011
12: Drive shaft (complete). Spare Part No: 200.012
13: Gear motor (2.2kW, 1400/30RPM, 400v). Spare Part No: 200.013
13G: Gear only. Spare Part No: 200.013G
13M: Motor only. Spare Part No: 200.013M
14: Strips (1pc) for axle and telescopic legs, dia 55mm. Spare Part No: 200.014
17B: Telescopic legs (rear). Spare Part No: 200.017B
17L: Telescopic legs (front left). Spare Part No: 200.017L
17R: Telescopic legs (front right). Spare Part No: 200.017R
20: Mixer arm (with rubber blade, side). Spare Part No: 200.020
20B: Mixer arm (without rubber blade, side). Spare Part No: 200.020B
21: Mixer arm (with rubber, mid-base). Spare Part No: 200.021
21B: Mixer arm (without rubber blade, mid-base). Spare Part No: 200.021B
22: Mixer arm (with rubber blade, tower-base). Spare Part No: 200.022
22B: Mixer arm (without rubber blade, tower-base). Spare Part No: 200.022B
23: Mixer arm (with rubber blade, side-base). Spare Part No: 200.023
23B: Mixer arm (without rubber blade, side-base). Spare Part No: 200.02B
24: Mixer arms (with rubber blades, complete set including top disc). Spare Part No: 200.024
24A: Mixer arms (with rubber blades, complete set, excluding top disc). Spare Part No: 200.024A
24B: Mixer arms (without rubber blades, complete set excluding top disc). Spare Part No: 200.024B
20S: Blade (hardox steel part, side). Spare Part No: 200.020S
21S: Blade (hardox steel part, mid-base). Spare Part No: 200.021S
22S: Blade (hardox steel part, tower-base). Spare Part No: 200.022S
23S: Blade (hardox steel part, side-base). Spare Part No: 200.023S
24S: Blade (hardox steel parts, complete set). Spare Part No: 200.024S
29: Bearing for drive shaft. Spare Part No: 200.029
30: Discharge chute (including nuts). Spare Part No: 200.030
20R: Blade (rubber part, side). Spare Part No: 200.020R
21R: Blade (rubber part, mid base). Spare Part No: 200.021R
22R: Blade (rubber part, tower-base). Spare Part No: 200.022R
23R: Blade (rubber part, side-base). Spare Part No: 200.023R
24R: Blade (rubber part, complete set). Spare Part No: 200.024R
SoRoTo 300L Spare Parts
1: Dust eliminator. Spare Part No: 300.001DL
2: Grid lid (hinge 100mm). Spare Part No: 300.002
3: Mixer drum (including mixer gate. complete set). Spare Part No: 300.003
3R: Rubber strap – for grid lid. Spare Part No: 300.003R
4: Frame (complete with wheels etc). Spare Part No: 300.004
5: Wheel (1pc, 250mm, excluding bolt). Spare Part No: 300.005
5A: Bolt (10x120mm) for 250mm wheel (including nut). Spare Part No: 300.005A
6: Wheel (1pc, 400mm, excluding bolt). Spare Part No: 300.006
6A: Axle (1pc) for 400mm wheel. Spare Part No: 300.006A
7: Mixer gate (including bolt etc). Spare Part No: 300.007
8: Switch 9.5 amp (with thermal circuit breaker, phase adjacent system). Spare Part No: 300.008
8E: Safety switch – by the grid lid. Spare Part No: 300.008E
8K: Cassette for safety switch (complete). Spare Part No: 300.008K
8K1: Piece for safety switch (bended metal part). Spare Part No: 300.008K1
8K2: Piece for safety switch (twisted metal part). Spare Part No: 300.008K2
8K3: Piece for safety switch (rubber part). Spare Part No: 300.008K3
8N: Switch 3x230V. Spare Part No: 300.008N
9: Outlet plug (1x230v, 16 amp). Spare Part No: 300.009
10: Top disc (separate, with u-bolts). Spare Part No: 300.010
10A: Top disc (separate, without u-bolts and nuts). Spare Part No: 300.010A
11: U-bolt (1pc) for securing top disc (8pcs needed in total). Spare Part No: 300.011
12: Drive shaft (complete). Spare Part No: 300.012
13: Gear motor (3.0 kW, 1400/30 RPM, 400V). Spare Part No: 300.013
13G: Gear only. Spare Part No: 300.013G
13M: Motor only. Spare Part No: 300.013M
14: Strips (1pc) for the axle and telescopic legs (dia 55mm). Spare Part No: 300.014
15: Telescopic leg (1pc). Spare Part No: 300.015
17: Pole (excluding globe coupling). Spare Part No: 300.017
17A: Stud bolt for pole. Spare Part No: 300.017A
18: Globe coupling (including bolt and nut). Spare Part No: 300.018
19: Spring for grid lid. Spare Part No: 300.019
19A: D-shackle bolt for spring. Spare Part No: 300.019A
20: Mixer arm (with rubber blade, side). Spare Part No: 300.020
21: Mixer arm (with rubber blade, mid-base). Spare Part No: 300.021
22: Mixer arm (with rubber blade, tower-base). Spare Part No: 300.022
23: Mixer arm (ith rubber blade, side-base). Spare Part No: 300.023
24: Mixer arms (with rubber blade, complete set including top disc). Spare Part No: 300.024
24A: Mixer arms (with rubber blade, complete set excluding top disc). Spare Part No: 300.024
20B: Mixer arm (without rubber blade, side). Spare Part No: 300.020B
21B: Mixer arm (without rubber blade, mid-base). Spare Part No: 300.021B
22B: Mixer arm (without rubber blade, tower-base). Spare Part No: 300.022B
23B: Mixer arm (without rubber blade, side-base). Spare Part No: 300.023B
24B: Mixer arms (without rubber blade, complete set, excluding top disc). Spare Part No: 300.024B
20R: Blade (rubber part, side). Spare Part No: 300.020R
21R: Blade (rubber part, mid-base). Spare Part No: 300.021R
22R: Blade (rubber part, tower-base). Spare Part No: 300.022R
23R: Blade (rubber part, side-base). Spare Part No: 300.023R
24R: Blades (rubber part, complete replacement set). Spare Part No: 300.024R
20S: Blade (hardox steel, side). Spare Part No 300.020S
21S: Blade (hardox steel, mid-base). Spare Part No: 300.021S
22S: Blade (hardox steel, tower-base). Spare Part No: 300.022S
23S: Blade (hardox steel, side-base). Spare Part No: 300.023S
24S: Blades (hardox steel, complete replacement set). Spare Part No: 300.024S
25: Turbo mixer arm (for mixing builder’s mortar). Spare Part No: 300.025S
29: Bearing for drive shaft. Spare Part No: 300.029
30: Discharge chute. Spare Part No: 300.030
Find out more
To find out more information on SoRoTo spare parts, call us on 01246 418144 or email us here.