An unpigmented resin binder which can be used and mixed with all of our rubber mulches to create a strong, soft, natural looking, free draining, wheelchair friendly, impact absorbing and cost effective rubber surface. Rubber mulch surfaces which only carry their many benefits thanks to this specially formulated resin binder are ideal for use around playgrounds, play areas, parks and other recreational areas. Supplied in 22kg drums, simply mix your mulch and binder in a forced action mixer for between 4-6 minutes to produce a consistent material where all of your rubber has been suitably coated ready to be laid. A typical mix consists of 100kg of mulch and 22kg of binder (a mixture ratio of 20%/5:1). Be sure to follow the manufacturers instructions to not lay this surface in damp or cold conditions (below 5 degrees) as the binders are moisture activated and contact with moisture during the installation will cause it to react and cure much quicker and result in potential issues with the finished surface.
If you would like some more information on our rubber mulch binder, read our product guide or contact us to speak with a member of our helpful and knowledgeable customer service team who can help you decide on the best product for your upcoming project.
Please note: Due to normal wear and tear and UV exposure, over time all colour coated products are likely to expose the base rubber. As a result, mulch may leave black marks on users if not recoated as part of maintenance. There are often variations in shade and shred size between mulch batches. Any orders of a single colour over 100 bags of mulch may be from more than one batch. For batch information refer to manufacture codes and dates marked on the pallet.