Green rubber tiles are manufactured from recycled rubber waste, and carry a critical fall height of up to 1 metre making them ideal for low level play areas. Each tile measures 500mm x 500m x 30mm meaning 4 tiles are required to create one square metre. Weighing just 4.8kg too, the tiles can be moved around and installed by just one person.
Non-slip playground floor tile
Our fully recycled rubber tiles are strong, durable, versatile, non-slip, cost effective and low maintenance soft flooring solutions which can be used for a wide range of applications including play areas, balcony flooring, roofing and so much more. The tiles can be installed onto solid and granular existing surfaces by either using the included interlocking pegs or securing using a strong rubber adhesive. Despite their toughness, our rubber tiles still allow for natural drainage which means that air, water and essential nutrients are able to reach the ground below. This is not always the case with other rubber flooring products but our tiles ensure the below surface is not neglected. Not only are the tiles great for at helping the ground around them but they are also easy to install and low maintenance, should your tiles become dirty you can simply clean them with warm soapy water and leave to dry. Available in two other colours, you can create vibrant or natural looking areas by using one colour or multiple coloured tiles for solid or patterned surfaces.
Rubber Play Tiles advantages
Rubber play matting is an extremely popular playground solution because the material is easy to install even in hard-to-reach places or uneven surfaces.
The matting does not create folds and gives a smooth, even surface which prevents trips and falls. It is available in a range of colours and designs that enable users to be creative when it comes to playground designs. The tiles are shock absorbent, perfect for chemical sensitivity and ADA compliant for wheelchair use.
Due to the typical manufacturing tolerances and the expansion and contraction of rubber under temperature fluctuations, we cannot guarantee that all pre-drilled holes will be aligned and some tiles may therefore require additional bonding or drilling to create perfect alignment. These tiles may be supplied with 8 pins per tile to assist with installation but are not sold as interlocking, thus any tiles with alignment issues will not be deemed to be faulty.
If you have any questions regarding our rubber tiles or have would like some advice on the best product for use on your upcoming project, please do not hesitate to get in touch with a member of our helpful and knowledgeable sales team.